ADVANCED RS485 SERIAL BUS FOR EL.MO. SECURITY SYSTEMS
ULTRABUS® and TERABUS® are the EL.MO. RS‑485 serial bus lines that introduces a whole new approach to creating intrusion detection systems. Devices connected to TERABUS® or ULTRABUS® RS‑485 serial lines are fully software controllable and programmable, either locally or remotely. This results in a considerable reduction in the number of field devices (concentrators and cabling) compared to classic hardwired devices, with the added bonus of advanced settings.
COST SAVINGS
Considerable reduction in field devices and cabling
SIMPLIFIED MAINTENANCE
Remote configuring and editing of device parameters via BrowserOne software
SIMPLICITY
Connection via RS‑485 simplifies the structure of an intrusion detection system
EFFICIENCY
Simplifies the installation process
PRECISION
Precise, accurate configuration of all devices
RELIABILITY
100% Italian-made top-quality products
PC configuration via BrowserOne
Remote configuration
Live detection of ambient noise
One cable for all devices
Detectors with REC function
Detectors with local memory of the last alarm waveforms
The balancing of the inputs is freely programmable using BrowserOne software, to manage with maximum flexibility inputs already present in the field that are not balanced according to the EL.MO. standards
In addition to the management from BrowserOne, the concentrators support TBSManager, a dedicated application that allows connecting directly to the TERABUS concentrators to:
View the concentratorstatus
Diagnostic operations inputs (power supply voltage monitoring and resistive values)
Adressing the concentrator
PC configuration via BrowserOne
Remote configuration
Live detection of ambient noise
One cable for all devices
Detectors with REC function
Detectors with local memory of the last alarm waveforms
Configuration via software
Devices from TERABUS® and ULTRABUS® lines are fully configurable via the BROWSERONE software, even from a remote PC via LAN/WAN, making installation and maintenance procedures that much easier. When it comes to sensors, there are numerous parameters for fine-tuning them to perfection and adapting them to the conditions of the environment they are set in, while the siren can be personalized with various specific features.
Configuration via PC using BrowserOne, even remotely
Simple, intuitive software, compatible with the whole family of control units in the EL.MO. intrusion detection line.
Live detection of ambient noise for accurate setting of alarm thresholds for each sensor, making them immune to the noise normally present in the room.
TERABUS® allows multiple addressing modes:
For single concentrator
Multiple automatic addressing (the control unit addresses and learns several concentrators autonomously)
Multiple guided addressing (the control unit addresses the concentrators and learns them upon the installer's action)
Reduced costs
Using devices connected directly to TERABUS® and ULTRABUS® serial lines results in a considerable reduction in costs: it means there is no need to use concentrators, while the amount of cabling needed to reach the products is significantly reduced. Essentially, the only outlay is the cost of laying the serial cable, in addition to the field devices.
Once the cable has been laid, and the products (sensors, sirens, smoke screen systems, control devices, serial line repeaters...) connected and addressed, all you need to do is switch on the PC and use BrowserOne to configure the whole system.
So there is no need to physically go to each individual device and fiddle with the DIP switches or jumpers inside: everything is done sitting in front of a PC. All this means it takes a lot less time to get the system up and running.
Using a single cable to connect all the devices results in a significantly less complex alarm system.
There is actually no longer any need for branching to reach devices, and you no longer need to place concentrators for sensors to be connected to: a single cable serves as the system's backbone.
Remote configuration via PC means shorter installation times, as well as less time spent on future maintenance. Installers can set field devices from the comfort of their own offices.
This means you get a system that is consistently maintained and offers lasting efficiency.
In addition to the management from BrowserOne, the concentrators support TBSManager, a dedicated application that allows by connecting directly to the TERABUS concentrators via USB:
View the status of the concentrator
Input diagnostics (monitoring supply voltage and resistive values)
Address the concentrator
Advanced functions
TERABUS® and ULTRABUS® sensors offer advanced functions: live detection of ambient noise for accurate setting of alarm thresholds, and the REC function for waveform recording and subsequent playback. In the LEDA485 sirens, the multifunctional LEDs and the warning light, sounder and voice warnings can be personalized based on events.
ULTRABUS®‑based sensors can be set highly accurately and with personalized settings. Functions like AND/OR mode, anti‑sneak, anti‑masking, anti‑blinding, look‑down, and LED enabling can all be set up directly via PC, even remotely. In addition, range, sensitivity, IR and MW thresholds, integration, and prealarm waiting times can all be set accurately with just a few clicks.
Another high-value-added feature - the only one of its kind - is the "REC" function. What it does is allow you to record each sensor's waveforms, thus enabling installers to make their way though the system and then view the behaviour of each sensor on the monitor via the highly accurate playback feature. This proves very useful for understanding the behaviour of sensors during their normal activity.
The balancing of the inputs is freely programmable using BrowserOne software, to manage with maximum flexibility inputs already present in the field that are not balanced according to the EL.MO. standards
The ULTRABUS® sensors can store locally the waveforms relating to the last alarm triggered. The sensor's alarm log can be read and viewed directly via the BROWSERIESS software.
Extended range
The RPX485 repeater is an active part of TERABUS® and ULTRABUS® systems. It repeats, regenerates and isolates the serial line, while enabling you to create simple or complex star structures with greater ranges.
Using two RPX485 devices, the distance covered can be extended up to 3 km, and you can produce large systems with a single serial line.
FUNCTIONAL DIAGRAM 1
Split the serial line into 2 complex branches